|
Contents
> How to ...
4.4.4.1. Opening a Third Party Disk Image
If you have created a Raw Disk Image using tools other
than Active@ UNERASER, you still can access and recover data from it
by composing disk image from chunks.
To open a Disk Image from chunks (without configuration file):
- Start Active@ UNERASER
- Press [F9] > Image > Run Compose Image
The Compose Image
dialog box appears.
Figure 4-12 Compose Image Dialog Box

- In this dialog box, build a Disk Image by adding one or more
chunks of the
image. Press Add. A File Open dialog box appears.
- Select files and press Ok. They appear in the list under
Chunks:.
- Specify image parameters in the Compose Image dialog box. A
description of the parameters follows:
- Image Type - Specify whether the image was
created for a logical drive or a physical device.
- Name - Image name as it will be displayed in
the device tree.
- Geometry - Device geometry (if you know it).
You can leave default values here, it will work, but performance
of the utility will be a bit slow.
Press Ok when all parameters
are complete.
- After refreshing the devices list, the new Disk Image appears in
the tree.
Work with this image the same way as with any regular device or
drive. Scan it for partitions and files, find and restore files from
it.
See Also
Creating a Disk Image
Previous < Contents >
Next
|